Our passive radiators offer a solution for small space and low tuned applications where a ported (vented) enclosure would be optimum, but where space does not allow for the use of a properly sized port opening or port length. Our radiators offer the user the ability to tune their enclosure lower than conventional ported enclosures normally allow for, in less space.
To say it simply, A passive radiator takes the place of a port when there’s not enough room for one. If available space is lacking, but you are not willing to give up output or sound quality, a passive radiator may be the perfect option.
Standard version features include: 10″ spoke aluminum cast frame – Black 10″ rubber mounting gasket Rear mounted stud for weight adjustment 8″ progressive roll poly-cotton spider Kevlar impregnated pulp cone body 1.5″ wide roll rubberized foam surround
They are manufactured to the strictest standard, and guaranteed to last. Hand built in the USA!
T/S Parameters for 10″ Passive Radiator: Fs = 29.0 Hz Qms = 5.65 Sd = 320cm^2 Vas = 86.1 L Mms = 176.0 g Cms = .245 mm/N Xmax = 65mm total Usable excursion = 3″ total Maximum moving mass = 1800 grams
Enclosure Recommendations: Passive radiators are recommended to be used as a replacement for a port. You should generally use about the same or slightly less enclosure volume with a PR that you would with a port. PR’s can be used to achieve a low tuning in a moderate or small sized enclosure by adding weight to the rear. The more weight that you add, the lower tuning that you’ll achieve.
The only limitation will be the upper tuning frequency. Depending on the size of the PR and the internal volume of the enclosure, there will be a maximum tuning frequency limit. For help with this, please contact us directly.
If you would like to customize this radiator with performance or cosmetic options that are not available in our online store, please submit a Custom Subwoofer Request.
Physical Specifications for 10″ Passive Radiator: Rated Diameter 10″ / 250 mm Overall Diameter 11.0″ / 280 mm Bolt Hole Circle 10.125” / 257 mm Cutout Diameter 9.375″ / 238 mm Mounting Depth 3.0″ / 76.2 mm Rear Stud Clearance* 4.5″ / 114 mm Displacement 0.07 ft.³ / 1.98 L Shipping Weight 6.5 lb / 2.94 kg
*The rear stud of the PR is left long, to make it easier to add additional weight to the radiator. The rear stud will travel beyond the rear edge of the frame during normal operation. If a shallow mounting depth is needed, this stud can be trimmed shorter. Trimming the rear stud can allow for the PR to be installed at the mounting depth of the frame only, without any additional clearance needed.
Reviews
There are no reviews yet.
Be the first to review “10″ Passive Radiator” Cancel reply
Our passive radiators offer a solution for small space and low tuned applications where a ported (vented) enclosure would be optimum, but where space does not allow for the use of a properly sized port opening or port length. Our radiators offer the user the ability to tune their enclosure lower than conventional ported enclosures normally allow for, in less space.
Reviews
There are no reviews yet.