15″ High Excursion Passive Radiator

From: $264.99

  • Dustcap Type

    Material Color

    Logo Type

    Logo Color

Our passive radiators offer a solution for small space and low tuned applications where a ported (vented) enclosure would be optimum, but where space does not allow for the use of a properly sized port opening or port length. Our radiators offer the user the ability to tune their enclosure lower than conventional ported enclosures normally allow for, in less space.

To say it simply, A passive radiator takes the place of a port when there’s not enough room for one. If available space is lacking, but you are not willing to give up output or sound quality, a passive radiator may be the perfect option.

Our new high excursion PR now offers even more excursion capability, meaning more output in the same amount of space. These new PR’s are are built utilizing a large spider diameter, our new tall roll surround, and high clearance frame. This combination allows for more movement from the passive radiator without mechanical noise or failure. When running subwoofers that are capable of extreme excursion levels, it only makes sense to use passive radiators that can keep up.

Standard version features include:
15″ 6 Spoke high excursion aluminum cast frame – Black
15″ rubber mounting gasket
Rear mounted stud for weight adjustment
10″ progressive roll poly-cotton spider
Kevlar impregnated pulp cone body
1.5″ tall roll rubberized foam surround

 

 They are manufactured to the strictest standard, and guaranteed to last.
Hand built in the USA!
flag

 T/S Parameters for 15″ High Excursion Passive Radiator:
Fs = 21.5 Hz
Qms = 5.65
Sd = 830 cm^2
Vas = 340 L
Mms = 295 g
Cms = .245 mm/N
Xmax = 80mm total
Usable excursion = 3.75″ total
Maximum moving mass = 2600 grams

Enclosure Recommendations:
Passive radiators are recommended to be used as a replacement for a port. You should generally use about the same or slightly less enclosure volume with a PR that you would with a port. PR’s can be used to achieve a low tuning in a moderate or small sized enclosure by adding weight to the rear. The more weight that you add, the lower tuning that you’ll achieve.

The only limitation will be the upper tuning frequency. Depending on the size of the PR and the internal volume of the enclosure, there will be a maximum tuning frequency limit. For help with this, please contact us directly.

 

If you would like to customize this radiator with performance or cosmetic options that are not available in our online store, please submit a
Custom Subwoofer Request.

 

Physical Specifications for 15″ High Excursion Passive Radiator:
Rated Diameter 15″ / 380 mm
Overall Diameter 15.5″ / 394 mm
Bolt Hole Circle 14.8″” /  376mm
Cutout Diameter 14.125″ / 358 mm
Mounting Depth 6.0″ / 153 mm
Rear Stud Clearance* 7.0 / 178 mm
Displacement 0.14 ft.³ / 3.96 L
Shipping Weight 11 lb / 4.98 kg

*The rear stud of the PR is left long, to make it easier to add additional weight to the radiator. The rear stud will travel beyond the rear edge of the frame during normal operation. If a shallow mounting depth is needed, this stud can be trimmed shorter. Trimming the rear stud can allow for the PR to be installed at the mounting depth of the frame only, without any additional clearance needed.

trPolypropylene Dome (Small) trCarbon Fiber Dome (Small)trFull Cone Cover (Small)

Reviews

There are no reviews yet.

Be the first to review “15″ High Excursion Passive Radiator”

Your email address will not be published. Required fields are marked *