Star Power 2500 Amplifier

(6 customer reviews)

From: $659.99

  • Add Acrylic Rear Panel? (Yes you still get the original rear panel also)

     
Category:

All Star Power amplifiers include free shipping to the lower 48 United States.

The Star Power 2500 amplifier is a single channel Mono amplifier designed to run at a 1 ohm load and is rated to produce 2500 Watts or more at 14.4V.

Star Power amplifiers are designed to offer better than rated power output capabilities along with the maximum possible reliability. These amplifiers will meet or beat their rated specifications

Star Power amplifiers can be linked together (strapped) so that 2 amplifiers can be combined to run as a single amplifier.

Standard version features include:
0 AWG Power and Ground terminal blocks (Dual for Star Power 5000)
Tiffany style RCA connections
Remote gain control knob
Clipping indicator (located on the amplifier and the remote gain control)
Protection indicator (located on the amplifier)
Thermal/Over Current/Speaker Short/Speaker DC protection circuits
Pink colored Double-sided epoxy PCB
Pink power LEDs
Custom tooled star heatsink
Reversible logo panel

Psi Car Audio 10kw amplifier amp dyno

Posted by Sundown Unofficial on Wednesday, June 10, 2020

Technical Specifications for Star Power 2500 Amplifier:
RMS Power Output @ 14.4V
4 ohms mono = 715 Watts
2 ohms mono = 1400 Watts
1 ohm mono = 2650 Watts
4 ohms linked (2 amplifiers) = 2700 Watts
2 ohms linked (2 amplifiers) = 5300 Watts

Signal-to-noise ratio = >90 db
Low pass frequency crossover = 30 Hz~250 Hz
Subsonic filter = 10 Hz~60 Hz
Bass boost = 0~12 db
Bass boost frequency = 30 Hz~90 Hz
Phase shift control = 0~180°
Frequency response  = 10 Hz~350 Hz
THD @ 4 ohm, 100 Hz = <0.1%
Efficiency @ 4 ohm, 100 HZ = 90%
Damping factor = >200
Input sensitivity = Variable 8V~200mV
Operating voltage = 8.5V~16V DC
Recommended inline fuse size = 200A

Recommendations:

We recommend using a minimum of 12 AWG speaker cable, 10-8 AWG is preferred.

Do not mount your amplifier to your enclosure. Excess vibrations will cause damage.

Use fuses between the battery and amplifier (recommended 18″ or less from the battery)

We recommend a minimum starting impedance of 0.7 ohms (1 ohm rated load) for maximum reliability

Physical Specifications for Star Power 2500 Amplifier:
Width 9.69″ / 235 mm
Length 17.71″ / 450 mm
Height 2.22” / 56.5 mm

Star Power Amplifier User Manual

6 reviews for Star Power 2500 Amplifier

  1. Mitch (verified owner)

    Running 2 of these strapped, powering my p2 12s. They’re such a cool amps. 10/10 highly recommend!

  2. Al (verified owner)

    Running mine at .5 on a stock alt, no big 3, and a single run of 1/0 to the trunk. I recently took a 6 hour trip playing music max volume the whole way. Yeah I feel safe admitting that because I don’t think it will blow, after a little box rise totally good and it’s been wired that way for a couple months. Paint splatter on these things would be tight

  3. Clint Stull (verified owner)

    Pure Power house beats the hell out of my platform 3 18 and it’s a beautiful amp pics don’t do it justice!

  4. Forrest minor

    I do not own the psi amplifier myself (yet) but several basshead buddies are running the 1500 and 2500 models and i just have to say DAMN! These amps are quality built and the efficiency for the power is crazy. You always hear of “skar will do this, sundown will do that, those amps are way overrated,etc) but I’ve not once seen a post on fb or heard someone say a bad word about psi. Cant wait to finally order my 2500, psi is over the top no doubt!

  5. Bryan Hill (verified owner)

    Have my star power 2500 pushing 2 red frame ds18 12s beside a incriminator ia 20 pushing two of the same subs. Psi won I will be swapping incriminator for psi soon as possible. I Love psi.

  6. Nathan

    This amp has plenty of power to drive my team sundown 15 very hard these are some of the best amps I have ever bought.

Add a review

Your email address will not be published. Required fields are marked *