Star Power 5000 Amplifier

(7 customer reviews)

From: $1,099.99

  • Add Acrylic Rear Panel? (Yes you still get the original rear panel also)

Category:

All Star Power amplifiers include free shipping to the lower 48 United States.

The Star Power 5000 amplifier is a single channel Mono amplifier designed to run at a 1 ohm load and is rated to produce 5000 Watts or more at 14.4V.

Star Power amplifiers are designed to offer better than rated power output capabilities along with the maximum possible reliability. These amplifiers will meet or beat their rated specifications

Star Power amplifiers can be linked together (strapped) so that 2 amplifiers can be combined to run as a single amplifier.

Standard version features include:
0 AWG Power and Ground terminal blocks (Dual for Star Power 5000)
Tiffany style RCA connections
Remote gain control knob
Clipping indicator (located on the amplifier and the remote gain control)
Protection indicator (located on the amplifier)
Thermal/Over Current/Speaker Short/Speaker DC protection circuits
Pink colored Double-sided epoxy PCB
Pink power LEDs
Custom tooled star heatsink
Reversible logo panel

Psi Car Audio 10kw amplifier amp dyno

Posted by Sundown Unofficial on Wednesday, June 10, 2020

Technical Specifications for Star Power 5000 Amplifier:
RMS Power Output @ 14.4V
4 ohms mono = 1300 Watts
2 ohms mono = 2580 Watts
1 ohm mono = 5070 Watts
4 ohms linked (2 amplifiers) = 5070 Watts
2 ohms linked (2 amplifiers) = 9700 Watts

Signal-to-noise ratio = >90 db
Low pass frequency crossover = 30 Hz~250 Hz
Subsonic filter = 10 Hz~60 Hz
Bass boost = 0~12 db
Bass boost frequency = 30 Hz~90 Hz
Phase shift control = 0~180°
Frequency response  = 10 Hz~350 Hz
THD @ 4 ohm, 100 Hz = <0.1%
Efficiency @ 4 ohm, 100 HZ = 90%
Damping factor = >200
Input sensitivity = Variable 8V~200mV
Operating voltage = 8.5V~16V DC
Recommended inline fuse size = 350A

Recommendations:

We recommend using a minimum of 12 AWG speaker cable, 10-8 AWG is preferred.

Do not mount your amplifier to your enclosure. Excess vibrations will cause damage.

Use fuses between the battery and amplifier (recommended 18″ or less from the battery)

We recommend a minimum starting impedance of 0.7 ohms (1 ohm rated load) for maximum reliability

Physical Specifications for Star Power 5000 Amplifier:
Width 9.69″ / 235 mm
Length 26.77″ / 680 mm
Height 2.22” / 56.5 mm

Star Power Amplifier User Manual

7 reviews for Star Power 5000 Amplifier

  1. Cody Scoles (verified owner) –

    Insane. Absolutely a power House and top amp in it’s
    Class.

  2. Cody Scoles (verified owner) –

    Insanity.

  3. Kyle French –

    Straight powerhouse! Have 2 of these beasts on four platform 3 15’s and man do they put out some crazy power! Highly recommend!

  4. Blade Thompson –

    Love all 4 of mine I have 2 strapped at .66 each and putting out massive clamped numbers also have 2 gain matched at .5 each and absolutely killing it… gotta love that STARpowa

  5. Gavin ploch –

    Absolute beast of an amplifier Have it wired to .5 and can play for more than 30 mins and it’s still not hot. And it definitely puts out more than rated power absolute power house!!! PSI ftw

  6. Gabriel LaRosa (verified owner) –

    I got one of these not to long ago with a platform 3 this amplifier is a total beast completely dominates all the other amplifiers I have had in the past

  7. T Forseen (verified owner) –

    Running 3 zvx-12v2 skar 12’s in a sealed enclosure at 1 ohm and if I don’t wear ear protection I’d be deaf

Add a review

Your email address will not be published. Required fields are marked *

Related products