12″ Platform 5

The Platform 5 series is a huge subwoofer that should only be used by the serious competitor or enthusiast. This subwoofer is capable of extreme power handling and more output than any other subwoofer that we have ever offered. The Platform 5 is a 100 lb. behemoth built with enormous 11″ diameter triple stacked magnets and is the only subwoofer that we offer with a 4″ diameter voice coil. This subwoofer was designed to be the biggest, strongest, loudest subwoofer that we could deliver. It uses the strongest possible magnet grade and an enormous 8 layer voice coil to create an incredibly strong magnetic force capable of moving the extremely stiff suspension to huge excursion and output levels.

Power Handling Ratings:
Standard RMS Power Handling – 3500 watts
W/ Optional Hi Performance Addition- 4500 watts
Peak Power Handling – 9000 watts
SPL Burp Power – 15,000 watts

Standard version features include:
Massive triple stacked 11″ x 1″ magnets
Chrome top and bottom plates
FEA optimized motor assembly
4/6 Spoke high excursion aluminum cast frame – Black
LARGE Chrome push terminals or 8ga XS-Flex OFC Direct Connect Wiring
Extended length 107mm aluminum flatwound voice coil
Dual 1 and Dual 2 ohm standard impedance
Quad 10″ linear roll poly-cotton spiders
1″ spider spacing ring
Triple sewn 3mm heavy duty leadwire
Kevlar impregnated pulp cone body
1.5″ tall roll rubberized foam surround

 They are manufactured to the strictest standard, and guaranteed to last.
Hand built in the USA!

Our subwoofers are available in two different  performance configurations, Standard and High Performance. The High Performance option will modify the parts used to build the subwoofer to increase the overall power handling and output capability.

The following upgrades would be  applied to the subwoofer if the High Performance option is selected:
Power handling increase from 3500 Watts to 4500 Watts RMS
FIVE 10″ linear roll spider suspension
QUAD stitched heavy gauge leadwires

 T/S Parameters for Platform 5 12″:
Revc = 3.00 ohms
Fs = 37.70 Hz
Zmax = 80.98
Qes = 0.25
Qms = 6.51
Qts = 0.24
Le = 4.03 mH
Sd = 490 cm^2
Vas = 0.60 ft^3 / 17.10 L
BL = 31.81
Mms = 356.47 g
Cms = 50.01
Sensitivity = 87.4 dB @1W/1m
Sensitivity = 91.7 dB @2.83Vrms/1m
Xmax = 70mm total
Usable excursion = 3.25″ total

Enclosure Recommendations:
Sealed – Not Recommended
Ported – 1.65-2.5 ft^3, tuned from 30-36hz

If you would like to customize this series of subwoofer with performance or cosmetic options that are not available in our online store, please submit a
Custom Subwoofer Request.

Physical Specifications for Platform 5 12″:
Rated Diameter 12″ / 300 mm
Overall Diameter 12.5″ / 318 mm
Bolt Hole Circle 11.675″ / 296.5 mm
Cutout Diameter 11.125″ / 282.5 mm
Mounting Depth 9.75″ / 247 mm
Magnet Diameter 11.02″ / 280 mm
Driver Displacement 0.39 ft.³ / 11.04 L
Shipping Weight 94.0 lb / 42.6 kg
The Platform 5 series is an extremely heavy item that requires at least people 2 mount properly. This subwoofer should be mounted to an extremely strong baffle with high-strength fasteners.

We offer connections to the subwoofer either via spring loaded terminals or direct connect wiring.

Push Terminals are chrome plated, and are marked with a red and black colors to designate the positive and negative terminals. They offer the simplest installation and provide a nice secure connection.

LARGE Push Terminals are made to accept a single 4ga or dual 8ga wires and use a heavy duty, extra-thick tab bolted to the push pin, to which the leadwires from the voice coil are soldered.

Direct Connect wiring offers the very best connection directly from your amplifiers output wiring to the voice coil of your subwoofer. Our direct connect wiring is securely attached to our interwoven braided lead wire via high temperature solder, then covered with heavy duty heat shrink. You can make your connection to the wiring via the twist and tape method, large wire nuts, crimp connectors, or solder.

XS-Flex is the best of the best! A 100% Pure Oxygen Free Tinned Copper wire, with 735 Strand Count and Soft Touch PVC Casing. XS Flex Cable is True AWG cable. The high strand count and soft touch cable jacket allows the wire to be super flexible and easy to use in any installation. XS-Flex is available in BLUE and CLEAR.

XP Flex Cable is also a True AWG cable. It is made up of 10% Oxygen Free Copper(OFC) 90% Copper Clad Aluminum(CCA), with  735 Strand Count and Soft Touch PVC Casing. XP-Flex is available in BLUE, RED and BLACK.

PSI Flex Cable is made to the same exact standards as XP Flex, but is available in PINK only.