15″ Platform 2

(10 customer reviews)

From: $504.99

  • Performance Level

    Impedance (Need Help?)

    Connection Type

    Surround Type

    Dustcap Type

    Material Color

    Logo Type

    Logo Color

platform-2-banner-17

The Platform 2 Series is a very well-rounded daily usage subwoofer. This subwoofer offers the utmost in sound quality, while also being able to handle large amounts of power. It is our best all-around Platform to build from, and is at home in pure SQ applications and also in high SPL street pounder systems. If you are looking for the best all-around performer, for a modest price, this is the subwoofer to get.

The Platform 2 retains the same mounting depth of our smaller Platform 1 Series, while power handling and output are both increased tremendously.

Power Handling Ratings:
Standard RMS Power Handling – 1500 watts
W/ Optional Hi Performance Addition- 1800 watts
Peak Power Handling – 3000 watts
SPL Burp Power – 4000 watts

Standard version features include:
Dual stacked 7.5″ x 1″ Y35 ceramic slugs
Chrome top and bottom plates
FEA optimized motor assembly
12 spoke aluminum cast frame – Black
Aluminum flatwound voice coil
Dual 1 or Dual 2 ohm standard impedance
Dual 8″ progressive roll poly-cotton spiders
Single stitched 3mm heavy duty lead wire
Kevlar impregnated pulp cone body
1.5″ wide roll rubberized foam surround

They are manufactured to the strictest standard, and guaranteed to last.
Hand built in the USA!
flag

high-performance

Our subwoofers are available in two different  performance configurations, Standard and High Performance. The High Performance option will modify the parts used to build the subwoofer to increase the overall power handling and output capability.

The following upgrades would be  applied to the subwoofer if the High Performance option is selected:
Power handling increase from 1500 Watts to 1800 Watts RMS
Extended length aluminum flatwound voice coil
Dual stiff spider suspension
Dual stitched heavy gauge leadwires

 

 T/S Parameters for Platform2 15″:
Revc = 3.90 ohms
Fs = 26.63 Hz
Zmax = 42.31
Qes = 0.60
Qms = 6.11
Qts = 0.55
Le = 3.75 mH
Sd = 830 cm^2
Vas = 4.47 ft^3 / 126.46 L
BL = 17.08
Mms = 276.52 g
Cms = 129.16
Sensitivity = 87.7 dB @1W/1m
Sensitivity = 91.0 dB @2.83Vrms/1m
Xmax = 56mm total
Usable Excursion = 3″ total

Enclosure Recommendations:
Sealed – 1.5-3.25 ft^3
Ported – 3.5-5.5 ft^3

This product may also be used in Infinite Baffle and Bandpass applications. Please contact us before purchasing this product for these installations to make sure that the standard parts will be compatible with your enclosure.

If you would like to customize this series of subwoofer with performance or cosmetic options that are not available in our online store, please submit a
Custom Subwoofer Request.

 

Physical Specifications for Platform 2 15″:
Rated Diameter 15″ / 380 mm
Overall Diameter 15.5″ / 394 mm
Bolt Hole Circle 14.625″ / 371.5 mm
Cutout Diameter 14.125″ / 358 mm
Mounting Depth 7.75″ / 197 mm
Magnet Diameter 7.5″ / 191 mm
Driver Displacement 0.16 ft.³ / 4.53 L
Shipping Weight 42 lb / 19.05 kg

dimensions

Polypropylene Dome (Small)

Carbon Fiber Dome (Small)

Full Cone Cover (Small)

We offer connections to the subwoofer either via spring loaded terminals or direct connect wiring.

Push Terminals are chrome plated, and are marked with a red and black colors to designate the positive and negative terminals. They offer the simplest installation and provide a nice secure connection.

Standard Push Terminals are made to accept a single 8ga wire and use a tab soldered directly to the push pin, to which the leadwires from the voice coil are soldered.
standard-terminal

LARGE Push Terminals are made to accept a single 4ga or dual 8ga wires and use a heavy duty, extra-thick tab bolted to the push pin, to which the leadwires from the voice coil are soldered. large-terminals

Direct Connect wiring offers the very best connection directly from your amplifiers output wiring to the voice coil of your subwoofer. Our direct connect wiring is securely attached to our interwoven braided lead wire via high temperature solder, then covered with heavy duty heat shrink. You can make your connection to the wiring via the twist and tape method, large wire nuts, crimp connectors, or solder.

direct-connect

XS-Flex is the best of the best! A 100% Pure Oxygen Free Tinned Copper wire, with 735 Strand Count and Soft Touch PVC Casing. XS Flex Cable is True AWG cable. The high strand count and soft touch cable jacket allows the wire to be super flexible and easy to use in any installation. XS-Flex is available in BLUE and CLEAR.

XP Flex Cable is also a True AWG cable. It is made up of 10% Oxygen Free Copper(OFC) 90% Copper Clad Aluminum(CCA), with  735 Strand Count and Soft Touch PVC Casing. XP-Flex is available in BLUE, RED and BLACK.

PSI Flex Cable is made to the same exact standards as XP Flex, but is available in PINK only.

10 reviews for 15″ Platform 2

  1. Will (verified owner)

    This is the best sub I have ever owned. I have thrown everything I possibly can at it and it still works perfectly. This sub has great sound quality no matter how big of a box you have it in. I’ve personally had it in 3 different boxes and the sound quality has been amazing in all of them. I would highly recommend this sub to anyone

  2. Zach Fraser (verified owner)

    Best sub I’ve owned so far! I have 1 upgraded and even running just a hifonics amp right now. it still hits harder than both of my 2 old c2 audio 15s. I can’t wait until I get a better amp to hear the subs full power!

  3. Cottie mills

    I’ve had my platform 2 15 for a few years now but on the inside of the cone it’s dated 2013 it’s five years old it’s old enough to be in kindergarten lol I bought it used and it has been my daily and I’m hard on it for sure slamming it full tilt in a probably 4³ foot box with a pretty nice size port on it not really sure the dimensions and it just takes it psi quality goes un matched anybody who knows anything will tell you this

  4. Nathan Streich

    Have one of these in my Lexus is300 in a custom built box sounds great I have had psi’s in every car I’ve owned never disappointed

  5. Noah Reese (verified owner)

    I have one of these in a box in the back seat of my pickup truck and it’s crazy. I have a hifonics 4k brutus running it at 1 ohm and this sub has not even flinched at it. Thanks PSI for the hook up on the amazing sub and great customer service

  6. andrew peters

    I have clipped the hell out of these, ran them with 7 cuft per sub, ran them below tuning and more recently send them over 3000w rms to these for years and they’re still going strong.

  7. Ken L (verified owner)

    amazing subs sound great and hit hard

  8. xBeastModeSwag (verified owner)

    dude i love these thing have 4 so far but i will do business again highly recommend

  9. Brian terjeson

    These are the best, everyone needs to get a couple of these these are the best, everyone needs to get a couple of these If your truly into performance

  10. Derrick Pfannebecker (verified owner)

    Not only did the sub beat any expectations in quality or performance.. but it is a beautiful product… and doing business with Dave.. almost better than the product itself..

Add a review

Your email address will not be published. Required fields are marked *