10″ Platform 2

(4 customer reviews)

From: $434.99

  • Performance Level

    Impedance (Need Help?)

    Connection Type

    Dustcap Type

    Material Color

    Logo Type

    Logo Color

platform-2-banner-17

The Platform 2 Series is a very well-rounded daily usage subwoofer. This subwoofer offers the utmost in sound quality, while also being able to handle large amounts of power. It is our best all-around Platform to build from, and is at home in pure SQ applications and also in high SPL street pounder systems. If you are looking for the best all-around performer, for a modest price, this is the subwoofer to get.

The Platform 2 retains the same mounting depth of our smaller Platform 1 Series, while power handling and output are both increased tremendously.

Power Handling Ratings:
Standard RMS Power Handling – 1500 watts
W/ Optional Hi Performance Addition- 1800 watts
Peak Power Handling – 3000 watts
SPL Burp Power – 4000 watts

Standard version features include:
Dual stacked 7.5″ x 1″ Y35 ceramic slugs
Chrome top and bottom plates
FEA optimized motor assembly
12 spoke aluminum cast frame – Black
Aluminum flatwound voice coil
Dual 1 or Dual 2 ohm standard impedance
Dual 8″ progressive roll poly-cotton spiders
Single stitched 3mm heavy duty lead wire
Kevlar impregnated pulp cone body
1.5″ wide roll rubberized foam surround

They are manufactured to the strictest standard, and guaranteed to last.
Hand built in the USA!
flag

high-performance

Our subwoofers are available in two different  performance configurations, Standard and High Performance. The High Performance option will modify the parts used to build the subwoofer to increase the overall power handling and output capability.

The following upgrades would be  applied to the subwoofer if the High Performance option is selected:
Power handling increase from 1500 Watts to 1800 Watts RMS
Extended length aluminum flatwound voice coil
Dual stiff spider suspension
Dual stitched heavy gauge leadwires

 

 T/S Parameters for Platform 2 10″:
Revc = 3.90 ohms
Fs = 28.97 Hz
Zmax = 52.93
Qes = 0.47
Qms = 5.81
Qts = 0.43
Le = 3.64 mH
Sd = 310 cm^2
Vas = 0.77 ft^3 / 21.82 L
BL = 17.37
Mms = 196.55 g
Cms = 153.60
Sensitivity = 82.3 dB @1W/1m
Sensitivity = 85.4 dB @2.83Vrms/1m
Xmax = 56mm total
Usable excursion = 3″ total

Enclosure Recommendations:
Sealed – 0.7-1.0 ft^3
Ported – 1.0-1.35 ft^3

This product may also be used in Infinite Baffle and Bandpass applications. Please contact us before purchasing this product for these installations to make sure that the standard parts will be compatible with your enclosure.

If you would like to customize this series of subwoofer with performance or cosmetic options that are not available in our online store, please submit a
Custom Subwoofer Request.

 

 Physical Specifications for Platform 2 10″:
Rated Diameter 10″ / 250 mm
Overall Diameter 11.0″ / 280 mm
Bolt Hole Circle 10.125” / 257 mm
Cutout Diameter 9.375″ / 238 mm
Mounting Depth 6.1″ / 155 mm
Magnet Diameter 7.5″ / 191 mm
Driver Displacement 0.13 ft.³ / 3.68 L
Shipping Weight 37 lb / 16.8 kg

dimensions

Polypropylene Dome (Small)

Carbon Fiber Dome (Small)

Full Cone Cover (Small)

We offer connections to the subwoofer either via spring loaded terminals or direct connect wiring.

Push Terminals are chrome plated, and are marked with a red and black colors to designate the positive and negative terminals. They offer the simplest installation and provide a nice secure connection.

Standard Push Terminals are made to accept a single 8ga wire and use a tab soldered directly to the push pin, to which the leadwires from the voice coil are soldered.
standard-terminal

LARGE Push Terminals are made to accept a single 4ga or dual 8ga wires and use a heavy duty, extra-thick tab bolted to the push pin, to which the leadwires from the voice coil are soldered. large-terminals

Direct Connect wiring offers the very best connection directly from your amplifiers output wiring to the voice coil of your subwoofer. Our direct connect wiring is securely attached to our interwoven braided lead wire via high temperature solder, then covered with heavy duty heat shrink. You can make your connection to the wiring via the twist and tape method, large wire nuts, crimp connectors, or solder.

direct-connect

XS-Flex is the best of the best! A 100% Pure Oxygen Free Tinned Copper wire, with 735 Strand Count and Soft Touch PVC Casing. XS Flex Cable is True AWG cable. The high strand count and soft touch cable jacket allows the wire to be super flexible and easy to use in any installation. XS-Flex is available in BLUE and CLEAR.

XP Flex Cable is also a True AWG cable. It is made up of 10% Oxygen Free Copper(OFC) 90% Copper Clad Aluminum(CCA), with  735 Strand Count and Soft Touch PVC Casing. XP-Flex is available in BLUE, RED and BLACK.

PSI Flex Cable is made to the same exact standards as XP Flex, but is available in PINK only.

4 reviews for 10″ Platform 2

  1. Jon R

    I’ve had this subwoofer since 2014 and I couldn’t be happier. This thing can take some abuse. At the time i bought the subwoofer I believe psi was not selling amplifiers and their wasnt a platform 3 10 so I got the platform 2. I had bought 2 platform 2s and powered them each with their own rockford punch 1000 witch the rms birth sheets came in at over 1400. I Daily play the subs at its rated 1000 rms and have never burnt a coil. If I need to I would buy these had boys again.

  2. Jr (verified owner)

    Definitely getting more than what your paying for! You just have to be sure you have the cubic foot for the box right. I have one 10 in a ram 1500 on a skar skv2 at 1500 watts rms and it flexes to no end and sounds great doing it definitely going to buy more for my next build

  3. Jake Boriel

    These subs are awesome. I bought Mine mid 2013 and have been blasting them since. I have Them running on an old RE 1500 watt amp and these subs still push as hard as you would want them. I have Them in a forward fire ported box under the seat of a Silverado. They are by far the best sounding subs for my taste

  4. Cory Granger

    Purchased one Psi platform 2 in a custom underneath the seat build with a Zapco 1kd. Wow talk about Quality spl sound bad thing the woofer needs more power definitely be looking into the Star 1500

Add a review

Your email address will not be published. Required fields are marked *